Configurando ArchLinux en una Dell Vostro 1320

Aca dejo para el resto del mundo la configuracion que le di a mi nueva Vostro 1320. Me hubiera venido bien tener esta data a mano, pero tampoco fue tan dificil. La wiki de Archlinux tiene un articulo para la maquina. Lamentablemente, a la hora de escribir esto, no habia informacion para los componentes de la mia (justo!:/ ). Asique dejo esto como complemento, algun valiente se animara a completar la info de la wiki.

Especificaciones del equipo
Intel® Core™ 2 Duo T6670 (2.20GHz, 2MB L2 Cache, 800MHz FSB)
13.3 inch UltraSharp™ WXGA LCD Display w/TrueLife™
4GB Shared Dual Channel DDR2 SDRAM at 800MHz, 2 DIMM
8X DVD+/-RW with double-layer DVD+/-R write capability, Roxio and Cyberlink PowerDVD™ DX 8.1 R
Deep Cherry Red with Intel® Intg Graphics Media Accelerator 4500M HD
250GB 5400RPM SATA Hard Drive
Dell Wireless™ 1397 802.11b/g Mini Card
Integrated 1.3MP Webcam and Digital Mic with webcam

xorg.conf

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection

Section "Module"
Load "dbe"
Load "dri2"
Load "glx"
Load "extmod"
Load "dri"
Load "record"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "evdev"
Option "Device" "/dev/input/by-path/platform-i8042-serio-0-event-kbd"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "synaptics"
Option "Protocol" "auto-dev"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Placa de red
La placa anduvo derecho, haciendo modprobe ne2k-pci, igual que en mi maquina de escritorio.

Wireless setup (wifi)
Sobre este tema la wiki de arch tiene un muy buen articulo.
Se puede instalar un paquete desde AUR supuestamente. Yo segui las instrucciones del proveedor, y salio andando derechito

[root@delta]~-> lspci | grep BCM43
0e:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)

despues para levantar la interfaz hice


iwconfig eth0 essid MiRed key miClave


dhcpcd eth0

rc.conf (puede actualizarse)

#
# /etc/rc.conf - Main Configuration for Arch Linux
#

# -----------------------------------------------------------------------
# LOCALIZATION
# -----------------------------------------------------------------------
#
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
#
LOCALE="en_US.UTF-8"
HARDWARECLOCK="localtime"
TIMEZONE="Canada/Pacific"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"

# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
#
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
#
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
#
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(lib80211_crypt_tkip wl !b43 r8169 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore !pcspkr vmmon vmci)

# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"

# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
#
HOSTNAME="delta"

# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
#
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
#
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#

#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
#wlan0="dhcp"
eth0="eth0 essid Mars key miClave"
INTERFACES=(eth0)

# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
#
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)

# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network.d
#
# This now requires the netcfg package
#
#NETWORKS=(main)

# -----------------------------------------------------------------------
# DAEMONS
# -----------------------------------------------------------------------
#
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
#
DAEMONS=(syslog-ng network netfs crond dbus hal alsa gdm)

Webcam

[root@delta]~-> lsusb | grep Webcam
Bus 002 Device 002: ID 0c45:63e0 Microdia Sonix Integrated Webcam

No se que hice, creo que anduvo de una. Bajen el cheese con el pacman y prueben.
Eso si, habia que setear bien los permisos
# gpasswd -a video
# chmod 666 /dev/video0

There are no comments on this post.

Responder

Introduce tus datos o haz clic en un icono para iniciar sesión:

Logo de WordPress.com

Estás comentando usando tu cuenta de WordPress.com. Cerrar sesión / Cambiar )

Imagen de Twitter

Estás comentando usando tu cuenta de Twitter. Cerrar sesión / Cambiar )

Foto de Facebook

Estás comentando usando tu cuenta de Facebook. Cerrar sesión / Cambiar )

Google+ photo

Estás comentando usando tu cuenta de Google+. Cerrar sesión / Cambiar )

Conectando a %s

A %d blogueros les gusta esto: